The Firing Line Forums - View Single Post

brentfoto · May 18, 2008, 10:01 PM

I guess it could be accomplished with lighter springs or a trigger/action job.

In the meantime, a good way to SMOOTH the DA trigger pull, try this:

http://www.gunblast.com/Poorboy.htm

This will not cost you one cent.

I've done this with all my revolvers and autos that have hammers. I just did the first step of the process, and noticed a marked improvement in smoothness. Try it five or six times, and don't overdo it with too much pressure.

May 18, 2008, 10:01 PM	#2
brentfoto Senior Member Join Date: August 20, 2007 Location: SoCal Posts: 362	I guess it could be accomplished with lighter springs or a trigger/action job. In the meantime, a good way to SMOOTH the DA trigger pull, try this: http://www.gunblast.com/Poorboy.htm This will not cost you one cent. I've done this with all my revolvers and autos that have hammers. I just did the first step of the process, and noticed a marked improvement in smoothness. Try it five or six times, and don't overdo it with too much pressure.