|
Marrying the trigger is also called boosting..
you are essentially removing any type of burrs on the sear and the hammer hooks. as long as the hammer hooks are excessively deep..it does a good job in single action..
this will do nothing for the double action pull..as the hammer will not ride on the sear for its release..
to lighten or smooth out the DA pull..the lighter D spring is the easiest way to go.
more can be done..but entail polishing of the internals, trigger, trigger bar, hammer etc. also you can try modifying hammer springs..lengths and widths..
but some knowledge of the internal workings of your gun is a must.
not unheard of to get a completely reliable DA pull 6# or under 4.5 with specific primers.
|