View Single Post
Old December 26, 2006, 09:53 AM   #15
Foxman
Senior Member
 
Join Date: August 13, 2005
Posts: 466
As indicated in an email message from Minwax, regarding their Tung Oil/Varnish (Minwax Tung Oil Finish) and Linseed Oil/Varnish (Minwax Antique Oil Finish):

"Both finishes are penetrating, oil-based, hand-rubbed finishes. The Tung Oil Finish is derived from oil extracted from the tung nut blended with an alkyd varnish resin. The Antique Oil Finish is derived from linseed oil blended with an alkyd varnish resin. Both finishes create a natural feel and appearance to wood (protection lies within the wood grain not on top of the wood). Overall, the Antique Oil Finish is a more durable finish and will have a softer look to the finish." It is important to remember that once an Oil/Varnish Finish is applied, only that finish should be used to refresh/renew the finish. Do not apply an Oil Finish on top of an Oil/Varnish Finish because the Oil Finish will be repelled by the Oil/Varnish Finish and will result in a gummy finish.

Advice from Minwax, great stuff for a finish as DFW says.
__________________
Better the man suspected of being a fool keep his mouth shut, than to open it and remove all doubt.
Foxman is offline  
 
Page generated in 0.03333 seconds with 8 queries