View Single Post
Old January 30, 2009, 03:26 PM   #8
azredhawk44
Junior member
 
Join Date: September 28, 2005
Location: Mesa, AZ
Posts: 6,465
Trigger return spring is 10 pounds from factory.

Wolff offers an 8lb one. This one isn't a problem to change out with regard to reliability.

The big one is the hammer spring.

They offer 9, 10, 11 and 12 pound springs.

Factory standard is 14.

Start with the 12, take it to the range, put at least a hundred rounds through it. Make sure it works reliably. If you need lighter and it still works good, go to 11. Rinse and repeat. Then go to 10.

With such a small frame and hammer, you will probably start seeing light strikes on the 9 or 10 pound hammer springs. Federal primers tend to be the most sensitive so if you have to have it as light as possible, use Federal defensive ammo and hope for the best.
azredhawk44 is offline  
 
Page generated in 0.03022 seconds with 8 queries