Soc It Flli Galesi Brescia Cal 635

Family Man · May 5, 2002, 07:13 PM

Help..I have been asked to disassemble and clean a friend's Brescia, .25 cal. I don't know where to start. I can do a 1911 and an M1 but this? Can anyone help? thanks

Destructo6 · May 5, 2002, 09:02 PM

You might try a post on Harley Nolden's forum.

Family Man · May 7, 2002, 05:56 PM

Thanks for your input. How do I contact this man who can help me with the Italian .25?

johnwill · May 7, 2002, 06:20 PM

I have the Armi Galesi .25 in my collection, I think they all come apart about the same.

- Remove the magazine and clear the chamber.
- Push the slide to the rear until the safety cut in the lower edge aligns with the pivot point of the safety lever. Trun the safety lever all the way to the rear, this will release the takedown latch.
- With the slide about 1/8" back of it's normal closed position, lift up at the rear to clear the top of the barrel. Push the slide forward and remove it and the recoil spring.
- The firing pin, spring, and spring guide will fall out of the slide somewhere during this process, pick them up from the floor and the pistol is field stripped.

MarylandDom · September 6, 2008, 05:17 PM

I was given a Soc it Flli Galesi Brescia Cal635, it was in pieces when I got it. I can get it together without the firing pin....just cant seem to figure out where it goes. If someone could let me know it would be alot of help.
My email address is [email protected]
Thanks!

joe hojnacki · March 6, 2010, 08:29 PM

i own an armi galesi brescia-brevette .635 calib. pistol. i want to purchase several 6 round magazines for this 25 cal. pistol. can anyone direct me to a supplier? thanks

Fredec · December 6, 2011, 09:13 PM

Try "www.triplek.com". They manufacture magazines and grips for a HUGE selection of handguns, Galesi models included.

john7260 · September 10, 2012, 02:30 PM

I also have a Socit Flli Galesi-Brescia cal 635 and would like to get a couple of clips. Have been unable to find them. Any leads. I tried Triplek they didn't have them.

May 5, 2002, 07:13 PM	#1
Family Man Junior Member Join Date: February 10, 2002 Posts: 11	Soc It Flli Galesi Brescia Cal 635 Help..I have been asked to disassemble and clean a friend's Brescia, .25 cal. I don't know where to start. I can do a 1911 and an M1 but this? Can anyone help? thanks

May 7, 2002, 05:56 PM	#3
Family Man Junior Member Join Date: February 10, 2002 Posts: 11	how do I contact Harley Nolden? Thanks for your input. How do I contact this man who can help me with the Italian .25?

May 7, 2002, 06:20 PM	#4
johnwill Senior Member Join Date: April 6, 2000 Location: PA Posts: 3,451	I have the Armi Galesi .25 in my collection, I think they all come apart about the same. - Remove the magazine and clear the chamber. - Push the slide to the rear until the safety cut in the lower edge aligns with the pivot point of the safety lever. Trun the safety lever all the way to the rear, this will release the takedown latch. - With the slide about 1/8" back of it's normal closed position, lift up at the rear to clear the top of the barrel. Push the slide forward and remove it and the recoil spring. - The firing pin, spring, and spring guide will fall out of the slide somewhere during this process, pick them up from the floor and the pistol is field stripped. __________________ I collect old pistols, got any?

September 6, 2008, 05:17 PM	#5
MarylandDom Junior Member Join Date: September 6, 2008 Posts: 2	Where does the firing pin go on a Soc it Flli Galesi-Brescia Cal635? I was given a Soc it Flli Galesi Brescia Cal635, it was in pieces when I got it. I can get it together without the firing pin....just cant seem to figure out where it goes. If someone could let me know it would be alot of help. My email address is [email protected] Thanks!

March 6, 2010, 08:29 PM	#6
joe hojnacki Junior Member Join Date: March 6, 2010 Posts: 1	armi galesi magazine i own an armi galesi brescia-brevette .635 calib. pistol. i want to purchase several 6 round magazines for this 25 cal. pistol. can anyone direct me to a supplier? thanks

May 5, 2002, 09:02 PM	#2
Destructo6 Senior Member Join Date: March 18, 1999 Location: Nogales, AZ USA Posts: 4,001	You might try a post on Harley Nolden's forum.

December 6, 2011, 09:13 PM	#7
Fredec Junior Member Join Date: December 6, 2011 Location: Wisconsin Posts: 1	armi galesi magazine Try "www.triplek.com". They manufacture magazines and grips for a HUGE selection of handguns, Galesi models included.

September 10, 2012, 02:30 PM	#8
john7260 Junior Member Join Date: September 10, 2012 Posts: 1	I also have a Socit Flli Galesi-Brescia cal 635 and would like to get a couple of clips. Have been unable to find them. Any leads. I tried Triplek they didn't have them.