Mag Interchange list

Eagleman · January 4, 2001, 01:00 AM

Aho

Is there a mag ionterchange out there? If not I would like to try and build one. The price of mags are going though the roof and if there wasa interchange it might help a lot of people. I only know of the following

S&W 20&30 rd 9mm mags fit Marlin Camp 9mm

SO if you know of one please send it to me.

PS. I am looking for Excam RX 22 mags

**Mike Irwin** · January 4, 2001, 01:45 AM

I THINK that Colt 1911 magazines fit the Marlin Camp 45.

I've got the Camp 9.

Mark King · January 4, 2001, 12:19 PM

S&W 59 series and 69 series magazines will work in the Kel-Tec P-11.

Also their neat little carbine will accept the same magazines and can be ordered with a handgrip/mag well conversion unit to utilize Glock or Beretta standard capacity magazines.

Mark / FL

Eagleman · January 4, 2001, 10:16 PM

Hey thanks a lot to both of you I will be compling all of this info and when I get some of it done I will put it on a web site.

PS. To all the rest keep those interchanges comming

bk40 · January 5, 2001, 12:08 AM

Eagleman,

I've seen where the Walther 88 Compact mags will work in the Walther P99. Also saw that S&W m41 mags will work in the Sig Trailside .22's

UK2TX · January 5, 2001, 05:58 PM

Ops

444 · January 6, 2001, 01:56 PM

Of course the Ruger P-89 mags fit the Ruger PC-9 and I belive the .40 also works in the .40 Carbine but all that is no revelation.

elmoh · January 7, 2001, 12:34 AM

If I'm not mistaken, a Taurus 92/99 mag will fit a Beretta 92, But a Beretta mag will not fit a Taurus.

Jspy · January 7, 2001, 04:06 PM

Does anyone know if one of the CZ mags will fit into the Colt Z-40 ? This is the model that Colt commisioned CZ to produce for them, but pulled the plug about 750 into it.

Russell92 · January 7, 2001, 05:33 PM

i'm nearly positive that Beretta and Taurus mags aren't interchangeable either way; they have different shaped notches in them for the mag release to fit in.

however, Beretta 92FS mags will fit in a 92 Centurion and a 92 Compact L (but they'll stick out a bit on the Compact L).

a lot of glock mags are interchangeable with one another. the .40 mags will work in the .357sig glocks. also any full sized mag will fit in a compact or sub-compact glock and a compact's mags will fit in a sub-compact. i believe there's a whole mag interchangeability chart on glockmeister's page.

Sig 226 mags will fit in a 228 and 9mm 229.

Eagleman · January 8, 2001, 11:35 AM

This is great guys. Keep them comming I will post them as soon as I get a few more. Some of the mags out there do not cost to much. It would be nice if they would fit our guns with the costly ones.

elmoh · January 8, 2001, 01:09 PM

The notches for the Taurus mag release are bigger than those on the Beretta, That is why a Tuarus mag will work in a Beretta and not the other way around.

houndawg · February 15, 2001, 07:14 AM

If a Taurus mag will fit a Beretta, and a Beretta mag will fit an HS 2000(by drilling a hole in the front of the mag), will a Taurus mag fit in an HS 2000(by drilling a hole in the front of the mag)? What I'm asking is whether or not the external dimensions of Beretta mags and Taurus mags are the same.

Rob

Jager1 · February 15, 2001, 09:42 AM

S&W 9mm 59 series pistol mags fit Daewoo pistols like the DP51.

LightningLink · February 15, 2001, 11:11 AM

... magazines are interchangeable. Heck, if you ever see the guns, they look identical.

LL

January 4, 2001, 01:00 AM	#1
Eagleman Member Join Date: January 19, 2000 Posts: 44	Aho Is there a mag ionterchange out there? If not I would like to try and build one. The price of mags are going though the roof and if there wasa interchange it might help a lot of people. I only know of the following S&W 20&30 rd 9mm mags fit Marlin Camp 9mm SO if you know of one please send it to me. PS. I am looking for Excam RX 22 mags __________________ Eagleman

January 4, 2001, 10:16 PM	#4
Eagleman Member Join Date: January 19, 2000 Posts: 44	Thx to both of you Hey thanks a lot to both of you I will be compling all of this info and when I get some of it done I will put it on a web site. PS. To all the rest keep those interchanges comming __________________ Eagleman

January 8, 2001, 11:35 AM	#11
Eagleman Member Join Date: January 19, 2000 Posts: 44	Thanks This is great guys. Keep them comming I will post them as soon as I get a few more. Some of the mags out there do not cost to much. It would be nice if they would fit our guns with the costly ones. __________________ Eagleman

February 15, 2001, 11:11 AM	#15
LightningLink Senior Member Join Date: April 2, 1999 Location: Palm Harbor, FL Posts: 105	Beretta 84 and Browning BDA .380 ... ... magazines are interchangeable. Heck, if you ever see the guns, they look identical. LL

January 4, 2001, 01:45 AM	#2
Mike Irwin Staff Join Date: April 13, 2000 Location: Northern Virginia Posts: 41,389	I THINK that Colt 1911 magazines fit the Marlin Camp 45. I've got the Camp 9.

January 4, 2001, 12:19 PM	#3
Mark King Senior Member Join Date: December 17, 1998 Location: FLA USA Posts: 361	S&W 59 series and 69 series magazines will work in the Kel-Tec P-11. Also their neat little carbine will accept the same magazines and can be ordered with a handgrip/mag well conversion unit to utilize Glock or Beretta standard capacity magazines. Mark / FL

January 5, 2001, 12:08 AM	#5
bk40 Senior Member Join Date: January 12, 1999 Location: Mississippi Posts: 1,004	Eagleman, I've seen where the Walther 88 Compact mags will work in the Walther P99. Also saw that S&W m41 mags will work in the Sig Trailside .22's

January 5, 2001, 05:58 PM	#6
UK2TX Senior Member Join Date: November 12, 2000 Location: Austin,TX Posts: 274	Ops

January 6, 2001, 01:56 PM	#7
444 Senior Member Join Date: November 20, 2000 Location: Ohio Posts: 3,968	Of course the Ruger P-89 mags fit the Ruger PC-9 and I belive the .40 also works in the .40 Carbine but all that is no revelation.

January 7, 2001, 12:34 AM	#8
elmoh Member Join Date: August 26, 2000 Location: The Great state of Kentucky. Posts: 53	If I'm not mistaken, a Taurus 92/99 mag will fit a Beretta 92, But a Beretta mag will not fit a Taurus.

January 7, 2001, 04:06 PM	#9
Jspy Senior Member Join Date: December 27, 2000 Posts: 214	Does anyone know if one of the CZ mags will fit into the Colt Z-40 ? This is the model that Colt commisioned CZ to produce for them, but pulled the plug about 750 into it.

January 7, 2001, 05:33 PM	#10
Russell92 Senior Member Join Date: January 29, 2000 Posts: 646	i'm nearly positive that Beretta and Taurus mags aren't interchangeable either way; they have different shaped notches in them for the mag release to fit in. however, Beretta 92FS mags will fit in a 92 Centurion and a 92 Compact L (but they'll stick out a bit on the Compact L). a lot of glock mags are interchangeable with one another. the .40 mags will work in the .357sig glocks. also any full sized mag will fit in a compact or sub-compact glock and a compact's mags will fit in a sub-compact. i believe there's a whole mag interchangeability chart on glockmeister's page. Sig 226 mags will fit in a 228 and 9mm 229.

January 8, 2001, 01:09 PM	#12
elmoh Member Join Date: August 26, 2000 Location: The Great state of Kentucky. Posts: 53	The notches for the Taurus mag release are bigger than those on the Beretta, That is why a Tuarus mag will work in a Beretta and not the other way around.

February 15, 2001, 07:14 AM	#13
houndawg Senior Member Join Date: February 8, 2000 Location: Illinois Posts: 479	If a Taurus mag will fit a Beretta, and a Beretta mag will fit an HS 2000(by drilling a hole in the front of the mag), will a Taurus mag fit in an HS 2000(by drilling a hole in the front of the mag)? What I'm asking is whether or not the external dimensions of Beretta mags and Taurus mags are the same. Rob

February 15, 2001, 09:42 AM	#14
Jager1 Senior Member Join Date: December 11, 2000 Location: Phoenix, Arizona Posts: 422	S&W 9mm 59 series pistol mags fit Daewoo pistols like the DP51.