June 22, 2001, 11:53 AM | #1 |
Member
Join Date: March 18, 2000
Location: Greensboro, NC
Posts: 91
|
How do you keep records?
How do you all keep your reloading records? I have an Excel spreadsheet that I keep all my info in.
Mark Last edited by Markk9; June 22, 2001 at 12:16 PM. |
June 22, 2001, 12:08 PM | #2 |
Senior Member
Join Date: August 30, 2000
Posts: 432
|
New to Loading but old fashioned
I just bought a very small spiral notebook at the drugstore.
While I just started loading, the first page contains load data: case mfr, # times loaded, bullet type, weight, powder type and amount, and... the actual group I fired, cut out into a 1.5" square, annotated with distance and date. Subsequent loads will each get their own page. If I am missing any data, please feel free to let me know. |
June 22, 2001, 12:20 PM | #3 |
Member
Join Date: March 18, 2000
Location: Greensboro, NC
Posts: 91
|
My headers are: Date Loaded, Lot Number, Caliber, Number in Lot, Bullet (Wgt, MFG, type), Powder (Mfg, Type, Wgt, and Lot number), Primer (Mfg, Type, and Lot number), Case (Mfg, Times Fired, Loaded, and Trimmed), Case lenght, OAL, Velocity (High, Low, SD) and Notes.
|
June 22, 2001, 12:45 PM | #4 |
Senior Member
Join Date: January 1, 1999
Location: St. Louis, MO suburbs
Posts: 386
|
I have been using an APPROACH database for two months, and am beginning to like it. It took a while ( 4 or 5 hours) to set it up. After twenty years, the spiral notebook thing wasn't working very well. For a supplement, I also keep selected representative targets for guns I still own.
|
June 23, 2001, 09:43 PM | #5 |
Member
Join Date: August 13, 2000
Location: North Carolina
Posts: 88
|
records
I use the spiral notebook of index cards. I have one for each rifle. Using the gum lables from Midway, I record the load data and the OAL of that particular bullet. I stick the lable on the left side of the card. If the load is especially accurat, I cut the group out of the target and using a glue stick, past it beside the gum lable. If it was not a good load, I make a note on the card so that I want try that load again. I like this method because I can carry the note book with me to the range and make any remarks about weather/temp/ wind and velocity on the card Michael
__________________
MP |
June 24, 2001, 09:55 AM | #6 |
Senior Member
Join Date: November 26, 2000
Posts: 147
|
I've only kept a log on my M1A and all the loads that go through it. I keep a clipboard with a leagal pad on it. I note time of day, weather conditions and anything else that might be helpful.I fill out the info on all my targets, I note what string,how many shots in that string, velocity on each shot, Average velocity, extreme spread, A.D. and S.D. and any remarks regarding that string. When I get home I put this info into Microsoft word and print out the days results then put the pages into a three ring binder. This works well for me.
__________________
M-14 OUT |
June 24, 2001, 08:41 PM | #7 |
Senior Member
Join Date: May 12, 2001
Location: Duvall, Wa
Posts: 552
|
I used to keep them all in a notebook, now I keep them in a database that's accessed through a program or web interface.
|
June 25, 2001, 05:30 PM | #8 |
Senior Member
Join Date: January 25, 2000
Posts: 4,625
|
I write the load data on slips of paper that invariably get lost, and then I try like crazy to remember the load.
|
June 27, 2001, 07:01 AM | #9 |
Senior Member
Join Date: January 6, 2000
Location: The hills of Western MD
Posts: 237
|
It appears that Monkeyleg is the only honest one among us!
I maintain a multi-sheet/linked monster of a spreadsheet that allows me to record my component purchases, load data, shooting results, notes, etc. I've got a real good idea of my actual expenses, cost per round, breakeven points, individual historical load performance and overall reloading/development history. The data is precise enough so that I can determine which loads and components provide the best mix of cost and performance. The spreadsheet above suits me because I'm constantly tailoring it to my requirements, and I really like to track my costs. However, there are times when a quick look would be better served by an index file or spiral notebook, as opposed to waiting for the PC to boot up. Some day, I'll transition the sheet to a database app with a more flexible report format for inclusion in a spiral binder. |
June 28, 2001, 05:09 PM | #10 |
Senior Member
Join Date: June 30, 2000
Location: Token Creek, WI
Posts: 4,067
|
I have a Microsoft Access template/database, which was designed expressly for handload recordkeeping. I forgot who I got it from, but if interested, email me and I'd be more than happy to send it to whoever wants it for their own record-keeping purposes.
|
June 30, 2001, 01:44 AM | #11 |
Senior Member
Join Date: April 22, 1999
Location: Chandler, Arizona, USA
Posts: 6,014
|
I use a loose leaf 3-ring binder.
__________________
Guns cause crime like spoons cause Rosie O'Donnell to be fat! I hunt, therefore I am. |
July 1, 2001, 08:29 AM | #12 |
Senior Member
Join Date: October 12, 1999
Location: Arkansas USA
Posts: 436
|
I use a 3 ring binder when working loads up.
Once I have the accuracy & results I want, I transfer the data to my PointBlank software. I also print a hardcopy so I'll have it even if the computer dies. That goes in the file cabinet. BTW: The PointBlank software is free & is a very well made Ballistics & data base software. I got it from WWW.Huntingnut.com |
Thread Tools | Search this Thread |
|
|