The Firing Line Forums - View Single Post

Shoney · February 20, 2008, 11:02 PM

Nothing wrong with it at all. The accuracy will be excellent. The difference will come with the micrometer adjust inserts, as they are much easier to accurately and repeatedly dial in powder amounts as you quick changing loads.

I suggest cleaning the measure before use. Either a bafflle (which you can make out of a pop can) or low powder levels will give you better results. The problem with constant low powder, is that you have to keep adding little amounts of powder. I did the low powder for a while every 50 rounds, but finally made my own baffle.

Good Shooting!

February 20, 2008, 11:02 PM	#2
Shoney Senior Member Join Date: February 21, 2002 Location: Transplanted from Montana Posts: 2,311	Nothing wrong with it at all. The accuracy will be excellent. The difference will come with the micrometer adjust inserts, as they are much easier to accurately and repeatedly dial in powder amounts as you quick changing loads. I suggest cleaning the measure before use. Either a bafflle (which you can make out of a pop can) or low powder levels will give you better results. The problem with constant low powder, is that you have to keep adding little amounts of powder. I did the low powder for a while every 50 rounds, but finally made my own baffle. Good Shooting! __________________ I pledge allegiance to the Flag - - -, and to the Republic for which it stands….Our Forefathers were brilliant for giving us a Republic, not a democracy! Do you know the difference??? and WHY?http://www.wallbuilders.com/LIBissue...les.asp?id=111