|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
March 25, 2023, 04:18 PM | #1 |
Junior Member
Join Date: March 12, 2023
Posts: 4
|
Need advice on scope ring height measurement?
I need scope rings for my AR that are at least 1" from top of picatinny rail to bottom of scope. Are measurements from manufacturers quoted from top of rail to centerline of scope or bottom of scope? Looking at Monstrum Rings.
Are they any good? Thanks. Oh ya, I don't want to use a AR mount because I use a brass catcher that needs the QD mounted under middle of scope. I have a couple of the Monstrum AR mounts and the brass catcher won't clear the bottom of the mount. Last edited by fooey; March 25, 2023 at 06:45 PM. |
March 25, 2023, 05:43 PM | #2 |
Senior Member
Join Date: March 21, 2012
Location: Indianapolis, IN
Posts: 3,977
|
Top of the rail to the centerline. Take a look at this mount. The 6th photo down shows how to measure. Scope rings for AR's are generally around 1.5in give or take a little. Due to the buffer tube coming straight back off the gun, and not having the drop in the stock like a traditional rifle, the scope needs to be higher so you can get a proper cheek weld.
If you looking for a good cheap mount I have been using the monstrum line fore a bit. Good and solid. Torque the base screws to 25in-lb and the ring screws to 15in-lb. Rock solid. they do make some 1in versions, but they did not have the right photo to show how to measure. https://www.amazon.com/dp/B0851QYQ5Z...roduct_details If I am understanding correctly, and you are wanting 1in between the top of the rail and the bottom of the rings, you will want a 1.5in height ring set of rings. Basically 1in, plus half and inch to get to the center line of the scope.
__________________
I don't believe in "range fodder" that is why I reload. Last edited by Shadow9mm; March 25, 2023 at 06:09 PM. |
|
|