|
Forum Rules | Firearms Safety | Firearms Photos | Links | Library | Lost Password | Email Changes |
Register | FAQ | Calendar | Today's Posts | Search |
|
Thread Tools | Search this Thread |
September 28, 2021, 09:52 AM | #1 |
Senior Member
Join Date: August 21, 2007
Location: Illinois - down state
Posts: 2,420
|
I can't find a holster that . . .
I have search all over the internet for a holster that fits a Sig 365, is OWB, clips on to belt, made of leather, and has a thumb break.
I've got a kydex paddle, but it's just uncomfortable. Help? Life is good. Prof Young |
September 28, 2021, 10:52 AM | #2 |
Senior Member
Join Date: May 22, 2009
Location: Washington State
Posts: 1,037
|
You might take a look at Mitch Rosen's 'Premier-FD'. It can be ordered with a thumb break (see the 5JR-TB in photos on the link below).
https://mitchrosen.com/products/holsters/belt-holsters/ "Instead of traditional belt slots, the PREMIER-FD has two wide straps that loop over the belt and lock up with sturdy snaps. A great feature for those who prefer not to thread the belt through holster slots to put on and take off the rig. Quick on, quick off, with excellent security." Not sure if this will work for you, but Rosen holsters I've used are a quality product. Just an opinion.
__________________
Treat everyone you meet with dignity and respect....but have a plan to kill them just in case. |
September 28, 2021, 06:11 PM | #3 |
Senior Member
Join Date: October 28, 2006
Location: South Central Michigan...near
Posts: 6,501
|
There a lot of hobby leather workers out there that may be induced to make what you want. Here is a basket-weave, full-flap, clip-on that I made for my S&W I frame .32 S&W Long.
I made it a clip-on because of expediency and intended use (on my own property, in my own woods). It can also be slipped on via belt loop behind the clip. Last edited by dahermit; September 29, 2021 at 01:32 PM. |
September 29, 2021, 06:05 AM | #4 |
Member
Join Date: July 12, 2021
Posts: 21
|
Almost all of my holsters are custom made.
Some I made myself, once you learn the process it's not hard, well not that hard. I started using glue on the seams, just to hold while doing the sewing, and it helps a lot. |
October 3, 2021, 12:49 PM | #5 |
Senior Member
Join Date: July 26, 2005
Location: The Bluegrass
Posts: 9,142
|
I have a Mitch Rosen Premier referred to in post 2. Mine is for commander-sized 1911s. Great quality and very comfortable. It does ride a bit lower than most of my concealed carry holsters so you have to consider that when wearing a covering garment
|
December 23, 2021, 06:00 PM | #6 |
Member
Join Date: September 18, 2015
Location: Midwest
Posts: 35
|
Desantis makes one for the P365. I've not used this exact one but I do like their products.
https://www.desantisholster.com/thumb-break-mini-slide/ Last edited by Jcon72; December 23, 2021 at 06:06 PM. |
December 24, 2021, 09:40 AM | #7 |
Senior Member
Join Date: January 20, 2009
Location: Amity Oregon
Posts: 793
|
OWB, clip on, leather, thumb break. Here ya go-----
https://www.barsonyholsters.com/new-...4aAqmeEALw_wcB |
December 24, 2021, 10:12 AM | #8 |
Member
Join Date: September 18, 2015
Location: Midwest
Posts: 35
|
Guess I missed the belt "clip" part and just thought he was looking for a belt holster.
|
December 24, 2021, 01:35 PM | #9 |
Senior Member
Join Date: August 21, 2007
Location: Illinois - down state
Posts: 2,420
|
Thanks BillM
BillM, thanks much. Looks perfect. Ordered one today.
Prof Young |
|
|